FAQs

Here are some frequently asked questions about decking treatment and maintenance. Please always refer to manufacturers instructions.

What product should I use to clean my deck timber?

Depending on the type of dirt, you should use either Equisol Prime or Equisol Vitalise. Equisol Prime is designed for new and unseasoned timber, or removing old oil coatings and tannins. Equisol Vitalise is designed to remove dirt, surface contaminants, grease, rust, iron stains and old colour.

What product should I use to strip old coatings off my deck?

Equisol Strip is a market leading stripper which will get rid of old film coatings or paint from your deck surface.

What product should I use to get rid of mould on timber?

Equisol Null is a biochemical formula designed to treat mould on timber. It can be used in a variety of situations including on outdoor timber furniture and on some indoor surfaces as well.

Can you get mould permanently out of timber?

Equisol Null kills mould down to the roots. It is an effective solution for killing mould.

How many coats of Equisol penetrating oil do I need to use on new timber?

Equisol Pro E365 should be applied a maximum of two coats. In some situations, like undercover areas, one coat is sufficient.

How do I know if my timber is clean enough for recoating?

Inspect the timber for patchy surfaces and uneven colouration. When the timber is wet it should have even water distribution over the surface – if you see water repelling in some areas, then those areas have not been sufficiently cleaned.

Why is Equisol more environmentally friendly that film forming coatings?

Equisol has a linseed oil base. Linseed oil is a natural ingredient that has been used in traditional timber treatments for hundreds of years. The Equisol oil is specially formulated to dry quickly leaving no sticky residue. It does not harm plants or wildlife.

Can I re-oil my deck in winter?

Equisol Pro E365 can be used effectively in temperatures under 10°C or above 35°C. We do not recommend applying oiling products in sub zero temperatures.